日本GOAL門鎖 GOAL LOCKS

高鐙國際有限公司新網站正式上線: http://www.twgdi.com

型號: V-SK-5

功能: 出入門用, 外側鎖心,內側轉鈕

鎖鉤可抗外力1,000 kg

安裝距離: 64mm

門厚度: 40-43mm

V-18 高精密度鎖心

鑰匙: 3支

可做鎖王系統

Model: V-SK-5

Function: Entrance

Hook Bolt Design, it is able to suffer 1,000 kg stress

Backset: 64mm

Door Thickness: 40-43mm

V-18 cylinder

Keying system: MK, GMK, GGMK, Key alike

Key: 03 keys

日本NITTO KOHKI 平推橫向拉門專用閉門器

特性:

- 開門後,門扇自動緩慢地關上,無須有關門的動作

- 左右門向皆適用

- 適合木門, 鋁製金屬門, 鐵門

- 乘載門重:30-150 kg , 視機種選擇

- 操作次數可達: 開關動作100萬次以上

- 最大門寬: 1,600mm

NITTO KOHKI Sliding Closer

Application: Sliding doors, wooden doors , metl door and Aluminuium doors

Features:

-When the door is released, the dooe will be automatically closed slowly and gently.

-Long service life

-Light door opening force

-Easy to install

-Both for righ and left handed opeing type

-Max. door width: 1,600mm

-Max, door weight: 150 kg

-Durability: More than 1 million open/close operations

GOAL V18 cylinder:

-UL 437 approved 
- CP approved
-Provide excellent security. high durability and more smooth operation.
-Key systems are available
-In addition KCH system available
-Key difference is available 12 billion by 18 columns pin cylinder
-Dimple key is reversible. Key an be inserted from either side

V-18鎖心特性: 鎖心內上面,左面及右面皆有pin,共18個pin,有防鑽裝置,精度更高,破壞難度更高.一般鑰匙插入鎖心開鎖時有方向的問題,鑰匙方向不對就無法把鑰匙插入鎖心開鎖.但V-18的鑰匙沒有鑰匙方向的問題,V-18的鑰匙正反面皆可插入鎖心開鎖.

1．為了預防企圖通過鎖殼上細縫實施暴力開鎖的舉動，特提供了徹底的防犯對策，同時為了阻止企圖鎖殼上用鑽頭開孔的暴力開鎖行為，還採取了在鎖殼上安裝防護鋼板的對策。
2．為了抵擋對於鎖心的鑽動攻擊和開孔攻擊，鎖芯內部使用了淬火熱處理部件和超硬並部件來加強防禦能力。針對要向外殼進行鑽孔攻擊的企圖使用了防護鋼板進行防禦。
3．在鎖心外面裝有防止技術開鎖的專門部件。錐形的淬火高溫處理部件被安裝成為空轉狀態，能有效防止使用非法開鎖工具來進行破壞，使技術開鎖變得困難。

高精度的V18鎖心所實現的120億分之1的互開率。獨特的防範鐵絲等不正當撬鎖的設計。通過苛刻的美國UL防範認證以及日本CP認證的鎖心

V-18 KCH 系統 (KCH system):  此系統是很精密的設計,當舊鑰匙遺失,只要您把鑰匙上的號碼告訴我們,鑰匙可以立即重新製作,這支新鑰匙一插入該門鎖,舊鑰匙便無法再使用,不需因為鑰匙遺失再更換新的門鎖.這種系統在日本通常以公司行號或辦公大樓,公家機關被廣泛使用.目前居家系統也可併入KCH系統使用,但只限於V-18型鎖心的門鎖.

V-18鎖心.也適用GMK ( Grand master key), GGMK(Great Grand master key), KA, KC, CNK, 系統

Model: C770

Ideally suit for light to medium interior or exterior door for residential and
commercial applications.

Certificates & Approvals
-Manufactured by quality assured ISO9001 factory.
-UL Listed No: R10469 & conformed UL10C

Features & Application

-Power size: 2-4

-Max. Door width: 1200mm

-Max. Door weight: 68 kg

-Max. opening angle: 145 degree

-One closer provides 3 different power sizes - Save inventory cost
-Adjustable Closing & Latching Speed
-Non-handed Installation
-Adjustable Backcheck- (Optional)
-Closing Speed Adjustable ( 160 ~ 15 )
-Adjustable Latching Action ( 15 ~ 0 )

美國的客人訂了500組的美規三級輔助鎖(方形), 數量: 500 組, 準備出口!

500 pcs of ANSI Grade 3 deadbolt Lock(square shape) is now ready to U.S.A.

產品簡介:

美規三級輔助鎖

型號: DA2

安裝距離: 60-70mm, 可調整

門厚度: 35-45mm

鑰匙: 3支

鎖體保固: 25年

ANSI Grade 3 Deadbolt Lock

Model: DA2

Backset: 60-70mm adjustable

Door Thikcness: 35-45mm

Key: 03

25 year machenical warranty

 Model: V-CMM-5                                                                                 

 Removeable Handle design /分離式把手設計

Applications: Sound-proof doors, Air-tight doors, Emergency exit doors, Heavy weight doors.

Lock the door tightly at three points (door edge, top and bottom)

Provide sound-proof and air-tightness

Easy operation with big handle

Handle cannot be operated without closing the door, so bolt or rod does not porject accidently.

Dummy handle for double leaf door is available.

Backset: 64mm

Door thickness: 29-33m, 33-43mm, 43-53mm

Gap(door and jamb): under 6mm

Cylinder: 6 pin, V18, GV, GP

Keying system: MK, GMK, GGMK, CNK

Model: 

1. CMM-1 : Passage

2. CMM-3 : Patio Lock

3. CMM-5: Entrance

4. CMM-6 : Entrance & Communicating Lock

5. CMM-7 : Storeroom Lock

此款門鎖適合安裝於: 隔音門,氣密門, 緊急逃生門或重量較重的門, 配合大把手操作時較輕鬆, 有固定式把手或分離式把手設計(特殊規格訂製), 單開門/雙開門適用

當門鎖上鎖時, 門扇上下(天地栓),以及門鎖鎖體均上鎖 (3點式上鎖)

此門鎖特點:當門扇沒有完全關上, 把手無法作用, 確保天地栓不會因為操作疏失而上鎖, 這也是提醒使用者操作門鎖上的安全!

規格 :

安裝距離: 64mm

適合門板厚度: 29-33mm, 33-43mm, 43-53mm

門與門框的間隙不超過6mm可適合安裝

鎖心: 6 pin, V18, GV, GP

鑰匙: 3支

鑰匙管理系統: Master Key, GMK, GGMK,工程用系統

門鎖功能:

1. CMM-1 : 內外均無鑰匙上鎖

2. CMM-3 : 內側轉鈕, 外側無任何裝置

3. CMM-5 : 內側轉鈕, 外側鑰匙

4. CMM-5 : 內外側均用鑰匙上鎖解鎖

5. CMM-7 : 內側無任何裝置, 外側用鑰匙上鎖解鎖

Great Convenience 
Uncompromised Security 
Easy Installation 

Touch to activate, touch to lock
Holds up to 25 user codes
Holds up to 4 single-entry codes
Volume control (adjustable to work with environments)
Vacation mode (deactivates all user codes temporarily)
Auto-lock with adjustable delay (10 - 99 seconds)
Back-up mechanical keyway
ANSI Grade 2 quality – deadbolt operates over 150,000 times
ANSI A156.25 compliant - resistant to dust, rain, and corrosion under variable temperatures
4-digit random guiding code prevents code-probing
Touch screen is temporarily disabled after 4 consecutive incorrect entries

User codes :25 sets (4 to 8 digits each)
Programming code :1 set (4 to 8 digits)
Key :2
Size (WxHxD) :Exterior lock body : 138 mm x 65 mm x 25.8 mmInterior lock body : 174 mm x 70 mm x 38 mm
Finish :Two-tone Black and Silver
Door bore hole :2-1/8"(54 mm) or 1-1/2"(38 mm)
Door thickness :1-3/8"(35 mm) to 2"(51 mm)
Adjustable backset :2-3/8"(60 mm) and 2-3/4"(70 mm)
Touch Screen Back-light color :Blue
Power :DC 6V (Four AA 1.5V alkaline batteries)
Operation temperature :-31 F to 150.8 F (-35 C to 66 C )(Temperature tolerance could vary due to different weather conditions)