Material...................................... Push bar –Steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel
Latch bolt.................................... 5/8’ throw, stainless steel.
Dead latch bolt............................ 9/16”, steel.
Strike........................................... for 5/8" stop
Projection.................................... 2-1/2” maximum, 1-7/8” pressed.
Reversible................................... Non-handed, reversible for all functions and trims.
For door...................................... 1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4”.
Door width................................... 3’ standard for door width of 2’-8” to 3’-0”;4’ standard for door width of 3’-8” to 4’-0”,
Stile............................................. 4-1/4” minimum
Mounting height......................... 40-5/16” from CL to finished floor recommended.
Mounting..................................... Furnished standard with sheet metal & machine screws or SNB as option.
Cylinders..................................... For trim, knob, lever & thumb-piece type “Schlage C” key way.
Dogging....................................... 1/4 turn, hex key dogging on non-fire labeled device.
UL listed...................................... For “Panic Hardware” and “UL”. Labeled (3 hours) fire exit hardware.
ANSI Standard............................ A156.3 Grade 1
Operation.................................... Inside by slight pressure on any point of the push bar all time.
Head cover……………………..... Big 8-1/2”x2-3/4”x2-1/2”(216mmx68.3mmx62mm) &
Standard Finishes...................... Big 8-1/2”x2-3/4”x2-1/2”(216mmx68.3mmx62mm) &
Small 6-1/3”x2-3/4”x2-1/2”(160mmx68.2mmx60mm)
US26, US26D, US32D (or other finishes upon request
Handleset: Passage, Storeroom, Classroom function available
Thumbpiece trim for 7100 exit device, US26D Finish
留言列表