日本GOAL門鎖 GOAL LOCKS

7100 Exit Panic Device

Specification:

Material: Push bar- Steel pressed or stainless stel pressed

Head Cover: Stel Pressed or stainless steel pressed

Spring: Stainless Steel

Latch bolt: 5/8" throw, stainless steel

Dead latch bolt: 9/16", steel

Srike: For 5/8" stop

Projection: 2-1/2" maximum, 1-7/8" pressed

Reversible: Non-handed, reversible for all functions and trims

For door: 1-3/4" thick of wood or metal door. Specify thickness if other htan 1-3/4"

Door width: 3' standard for door width of 2'-8" to 3'-0", 4' standard for door widht of 3'-8" ti 4'-0"

Stile: 4-1/4" minimum

Mounting height: 40-5/16" frin CK to finished floor recommended

Mounting: Furnished standard with sheet metal & machin screws or SNB as option

Cylinders: for treim, knob, lever & thumb-piece type, " Schlage C" keyway

Dogging: 1/4 turn, hex key dogging on non-fire labeled device

UL listed: For" Panic Hardware" and "UL" (3 hours) fire exit hardware

ANSI standard: A156.3 Grade 1

Operation: Inside by slight pressure on any point ofthe push bar at all time

Model: Rim Type, vertical rod, exit alarm kit

Standard Finish: US26, US26D, US32D